CONSTRUCTION   The standard construction is horizontal foot mounted design, single or multistage radially split casing clamped together by external tie-bolts and sealed with gaskets.   SUCTION AND DELI EVERY NOZZLES:   The standard design is Vertical Delivery and suction nozzles in oval flange for low head and low capacities designated as SHP OF series and round flanges for high head and higher capacities designated as SHP RF Series.   DRIVE   The prime mover is directly connected to the pump through a flexible coupling.   DIRECTION OF ROTATION   The direction of rotation is clockwise as viewed from the coupling end   SEALING ARRANGEMENTS   SHP OF series pumps is fitted with standard mechanical seal for leak proof operation.   SHP RF series pumps are fitted with conventional soft graphite lubricated glands in the stuffing box mechanical seals can be provided in this model on specific request.   DESIGN   These pumps are regenerative types. These are suitable for lifting liquids from a depth of 8 meters. These are available with hot water construction for operating temperatures of up to 100 degrees C.   MATERIAL OF CONSTRUCTION   Suction/Delivery Casings C.I. Gr.20 Impellers Bronze Shaft AISI 410 Bearings Standard Deep Groove Ball Bearings And Bush Bearings Keys AISI 410 Clamping Studs EN-8